ubber sheets are used in a variety of applications. They are used as simple doormats to cases where the sheets have to withstand highly corrosive and harsh environment such as splash zone in offshore applications. cean Rubber Factory L.L.C., manufacture different types of sheets. The elastomer used in the manufacture undergo different tests in our laboratory to ensure chemical combinations and physical properties complying to the specifications as per the quality system accredited to ISO 9002 standards.
OCEAN ELASTOMERIC SHEETS - Comparison Chart
BRAND NAME PHYSICAL PROPERTIES APPLICATIONS Riso AA T.S = 160 kg/cm² E.A.B = 500% TEMP = -20 to +110° Celsius Splash zone, risers, clamps Riso AB T.S = 100 kg/cm² E.A.B = 300% TEMP = -10 to +100° Celsius Ship flooring, industrial matting, gaskets  Riso AC  T.S = 60 kg/cm² E.A.B = 300% TEMP = 0 to +90° Celsius Gaskets, general purpose for industrial uses, pipe wraps  Resoil AA  T.S = 160 kg/cm² E.A.B = 350% TEMP = -25 to +110° Celsius Seals, oil & gas resistant gaskets, oil & gas resistant matting   Resoil AB  T.S = 130 kg/cm² E.A.B = 350% TEMP = -15 to +90° Celsius Medium resistance to oil & gas application  Kouchuk  T.S = 50 kg/cm² E.A.B = 500% TEMP = -30 to +70° Celsius Gaskets, pipe wraps, shock absorbents  Enviro AA  T.S = 100 kg/cm² E.A.B = 400% TEMP = -30 to +150° Celsius Sewage pipe line, gaskets, products exposed to direct sunlight, steam   Enviro AB  T.S = 50 kg/cm² E.A.B = 500% TEMP = -30 to +150° Celsius Resistant to acids of medium aggressiveness  Fluoro  T.S = 140 kg/cm² E.A.B = 200% TEMP = -20 to +250° Celsius Engine seals, high temperature gaskets, oil & fuel resistant products like expansion joints, seals for pipe coupling and naphtha applications El-mats  T.S = 110 kg/cm² E.A.B = 350% TEMP = -30 to +70° Celsius Electrical resistant flooring  Antislip Mats  T.S = 80 kg/cm² E.A.B = 350% TEMP = -30 to +70° Celsius Antislip floorings  Fireflex  T.S = 100 kg/cm² E.A.B = 350% TEMP = -20 to +110° Celsius Fireflex floorings  T.S. = Tensile Strength E.A.B. = Elongation at Break TEMP = Temperature
Sheets and Colours SHEET/ COLOURS BLUE GREEN YELLOW BLACK GREY Riso AA           Riso AB            Riso AC            Resoil AA            Resoil AB            Kouchuk            Enviro AA            Enviro AB            Flouro            El-Mats            Anti-Slip            Fireflex            Other colours on request

Standard Sizes: ll the sheets are available in 1200 mm width in 10 meter long rolls in thicknesses varying from 3mm upwards such as 4mm, 5mm, 6mm, 8mm, 10mm, 12mm etc. Special sizes could be manufactured as per request. PROPERTIES Riso sheets are highly resistant to ageing, hot air and most chemicals. Riso sheets have moderate to good resistance to oils and petrol, good resistance to swelling in mineral oils with high aniline point, greases, refrigerants and water. Riso sheets have excellent resistance to swelling in seawater. Temperature range for use is -20 to +110° C. Resoil sheets have very good resistance to swelling in aliphatic hydrocarbons like propane, butane, petroleum, mineral oils (lubricating oils and hydraulic oils), fire retardant hydraulic fluids, animal oils and greases, light heating oil and diesel. Resoil is also suitable for hot water applications up to 110° C. Temperature range for use is -25 to +110° C. Kouchuk sheets have high tensile strength and elasticity. These sheets have low temperature behaviour and good abrasion resistance. Kouchuk has good resistance to swelling in most acids and alkalies at low to moderate concentrations as well as alcohol and water. Kouchuk has good resistance to sea water. Temperature range for use is -30 to +70° C. Enviro sheets have excellent resistance to ozone and heat, low temperature flexibility, low electrical conductivity and resistance to polar solvents. Good resistance to swelling in hot water, steam, oxidising media, some acids and alkalies make Enviro Sheets a popular choice. Temperature range for use is -30 to +150° C. Based on the fluoro carbon, Fluoro sheets have outstanding resistance to heat ageing and ozone, excellent non-permeability to gases, good resistance to swelling in mineral oils and greases, aliphatic and aromatic hydrocarbons. Temperature range for use is -20 to +250° C. El-mats are electrical resistant mattings, made of special quality rubber which resist electrical shocks and are used in control rooms, switchboard panels, basements and electrical machinery rooms. El-mats can withstand voltage up to 20 kv. Temperature range for use is -30 to +70° C. Anti-slip mats are used in factory floors, machinery work place, office flooring, etc. They have high abrasion resistance. Available in various colours. Temperature range for use is -30 to +70° C. Fireflex sheets have excellent resistance to fire, hot air and ageing. Flame persistence is 3 seconds. Fireflex sheets have moderate to good resistance to oils, petroleum and very good resistance to ozone.   Temperature range for use is -20 to +110° C   The temperature shown are the recommendations for constant use. Occasional short time peaks could go upto 20% more.

Sheets for special applications can be manufactured as per request. Examples of special applications sheets that we can manufacture are:         Resistant to specific chemicals   Resistant to high abrasion   Suitable for drinking water   Resistant to sewage substances   Resistant to naphtha   Heat resistant sheets   Other special applications

HOW TO ORDER   State application   Working temperature   Media in contact   Dimensions

© OCEAN RUBBER FACTORY LLC, UAE. All rights reserved. Site best viewed at 800x600 pixels and Java supported browser. Web Site designed & maintained by CYBERWORLD Information Systems. Please report any dead links to Web Master & CWIS